成都品茶不限次_同城空降快餐联系_QQ快餐200QQ群_微信二维码叫小妹150

数据资源: 科信所期刊全文

竹纤维增强同源生物油改性酚醛树脂复合材料的创制

?

编号 lyqk011574

中文标题 竹纤维增强同源生物油改性酚醛树脂复合材料的创制

作者 李瀛  陈维江  任学勇  李严  杜雪利  杨顺心  刘文杰 

作者单位 1. 北京林业大学材料科学与技术学院, 国家林业草原木质材料循环利用工程技术中心 北京 100083;
2. 金隅微观(沧州)化工有限公司 河北 沧州 061199

期刊名称 世界竹藤通讯 

年份 2024 

卷号 22

期号 5

栏目名称 学术园地 

中文摘要 纤维增强树脂复合材料具有轻量化、高性能的优点,在航空航天、风电等行业有着广泛的应用。在“以竹代塑”背景下,以竹纤维和竹材衍生物为原料制造绿色复合材料成为竹材加工利用的热点方向。本研究分别采用竹纤维和生物油酚醛树脂来替代玻璃纤维和石化原料酚醛树脂,制备出了竹纤维增强生物油酚醛树脂复合材料,重点研究了不同固化剂对树脂固化性能的影响,并基于正交试验对复合材料的手糊工艺参数进行了优化。结果表明:1)成功制备了可中低温固化的生物油酚醛树脂,树脂粘度300 mPa·s,固体含量45.15%,pH值10.91;使用的复配固化剂优化质量配比为m(对甲苯磺酸)∶m(盐酸)∶m(磷酸)∶m(无水乙醇)=10∶1∶2∶4,适宜添加量为5%,凝胶时间为26 min,较好地满足手糊法制备复合材料的工艺要求。2)在纤维/树脂比例40%、固化时间5 h、固化温度70 ℃的工艺参数下,制备的复合材料弯曲强度达到105.57 MPa,拉伸强度为62.48 MPa,力学性能较优。所创制的新型竹纤维增强同源生物油改性酚醛树脂复合材料具有绿色低碳、轻质高强的特点,有望应用在竹质建筑、家居、板材、汽车/高铁内饰等建筑建材类和工业生产类代塑领域。

关键词 竹纤维  生物油酚醛树脂  复合材料  固化剂  力学性能 

基金项目 国家重点研发计划项目子课题(2022YFD2200904);国际竹藤组织试点成员国“以竹代塑”关键技术研究与示范项目子课题;河北省专精特新“小巨人”企业科技特派团项目。

英文标题 Creative Preparation of Bamboo Fiber Reinforced Composites with Homologous Bio-oil Modified Phenolic Resin

作者英文名 Li Ying, Chen Weijiang, Ren Xueyong, Li Yan, Du Xueli, Yang Shunxin, Liu Wenjie

单位英文名 1. School of Materials Science and Technology, Beijing Forestry University, National Forestry and Grassland Engineering Technology Center for Wood Resources Recycling, Beijing 100083, China;
2. Jinyu Micro (Cangzhou) Chemical Co., Ltd., Cangzhou 061199, Hebei, China

英文摘要 Fiber-reinforced resin composites have the advantages of lightweight and high performance, which are widely used in the industries of aerospace and wind power. Under the background of the “Bamboo as a Substitute for Plastic” Initiative, green composites made of bamboo fiber and bamboo derivatives have become a hot topic of bamboo processing and utilization. In this study, bamboo fibers and bio-oil phenolic resin are used to replace glass fibers and phenolic resin, a petrochemical material, and bamboo fiber-reinforced composites are prepared with bio-oil phenolic resin, focusing on the effect of different curing agents on the curing properties of the resin. Then the parameters of the hand lay-up process of the composite are optimized based on orthogonal tests. The results show that: 1) The bio-oil phenolic resin that could be cured at low or medium temperatures is successfully prepared, with a viscosity of 300 mPa·s, a solid content of 45.15%, and a pH value of 10.91. The optimized mass ratio of the compound curing agent, i.e., m (p-toluene sulfonic acid): m (hydrochloric acid): m (phosphoric acid): m (anhydrous ethanol), is 10∶1∶2∶4, the appropriate additive amount is 5%, and the gelation time is 26 min, which can better meet the process requirements of composites prepared by the hand lay-up method; 2) With a 40% fiber/resin ratio, a curing time of 5 h, and a curing temperature of 70 ℃, the composites prepared have the flexural strength of 105.57 MPa, a tensile strength of 62.48 MPa, presenting excellent mechanic properties. The composites creatively prepared are green, low-carbon, lightweight, and high-strength and they are expected to be applied in the building material sector and industrial production such as bamboo construction, household, panels, and automotive/high-speed railway interiors.

英文关键词 bamboo fiber;bio-oil phenolic resin;composite material;curing agent;mechanical property

起始页码 22

截止页码 31

作者简介 李瀛,男,从事竹质复合材料方面研究。E-mail:ly3230330@bjfu.edu.cn。

通讯作者介绍 任学勇,男,副教授,主要从事木竹能源与材料方面研究。E-mail:rxueyong@bjfu.edu.cn。

E-mail rxueyong@bjfu.edu.cn

DOI 10.12168/sjzttx.2024.08.23.002

参考文献 [1] 张萌, 冯冰涛, 王晓珂, 等. 天然纤维增强热塑性复合材料制备与应用研究进展[J]. 工程塑料应用, 2023, 51(10): 179-185.
[2] 刘晓胜. 基于生物油的改性酚醛树脂制备方法及性能研究[D]. 泰安: 山东农业大学, 2022.
[3] CHENG Y Y, SUI G H, LIU H, et al. Preparation of highly phenol substituted bio-oil-phenol-formaldehyde adhesives with enhanced bonding performance using furfural as crosslinking agent[J]. Journal of Applied Polymer Science, 2019, 136(4): 46995. DOI:10.1002/APP.46995.
[4] 李岚, 朱霖, 朱平. 中国竹资源及竹产业发展现状分析[J]. 南方农业, 2017, 11(1): 6-9.
[5] 吴凤, 刘彤, 廖万鹏, 等. 玄武岩纤维增强树脂复合材料的现状与发展[J]. 塑料, 2023, 52(2): 89-93.
[6] 郝秀. 竹基纤维复合材料重组单元制备机理与力学性能增强机制[D]. 哈尔滨:东北林业大学, 2023.
[7] 杨人元, 周腾, 王宏伟, 等. 天然植物纤维增强热塑性复合材料的研究进展[J]. 精细化工, 2024, 41(8): 1658-1664, 1678.
[8] 薛忠民, 王占东, 尹证. 中国工业复合材料发展回顾与展望[J]. 复合材料科学与工程, 2021(6): 119-128.
[9] 马子强. 酚醛树脂的合成及应用研究进展[J]. 合成树脂及塑料, 2021, 38(6): 71-74.
[10] 孙鑫, 王刚, 凌芳. 酚醛树脂的研究进展及发展趋势[J]. 上海化工, 2022, 47(1): 59-63.
[11] 方红霞, 吴强林, 江蓉, 等. 酚醛树脂共聚改性竹纤维复合材料的制备及其碳化行为[J]. 材料研究学报, 2014, 28(11): 853-857.
[12] 李龙梓, 邱建华, 许霞. 热固性酚醛树脂固化剂研究[J]. 精细石油化工进展, 2015, 16(4): 51-53.
[13] 李晓娟, 常建民, 范东斌, 等. 落叶松生物油-酚醛树脂胶粘剂的研制及性能研究[J]. 粘接, 2009, 30(11): 61-63.
[14] 崔勇, 常建民, 王文亮. 玻璃纤维增强热解油酚醛树脂材料的制备与性能[J]. 东北林业大学学报, 2017, 45(10): 76-81.
[15] 毛安, 樊茂祥, 张翔, 等. 生物油-酚醛共缩聚树脂与生物油/酚醛共混树脂的性能研究[J]. 国际木业, 2017, 47(7): 34-38.
[16] 李宏伟, 贾闻达, 马希汉, 等. 生物油改性制备低游离醛含量生物油酚醛树脂[J]. 西北林学院学报, 2015, 30(6): 210-216.
[17] LI C, REN X, HAN S, et al. The preparation and performance of bamboo waste bio-oil phenolic resin adhesives for bamboo scrimber[J]. Forests, 2024, 15(1): 79. DOI: 10.3390/f15010079.
[18] 崔勇, 常建民, 王文亮. 玻璃纤维增强塑料用热解油-酚醛树脂的合成工艺[J]. 林业工程学报, 2017, 2(6): 67-73.
[19] 伊江平, 李本, 王宇飞, 等. 可发性生物油-酚醛树脂制备工艺研究[J]. 热固性树脂, 2013, 28(4): 29-33.
[20] 李城. 生物质改性酚醛树脂的合成、表征与固化机制研究[D]. 北京: 北京林业大学, 2020.
[21] WANG F, ZHOU S, LI L, et al. Changes in the morphological-mechanical properties and thermal stability of bamboo fibers during the processing of alkaline treatment[J]. Polymer Composites, 2018, 39(增刊3): 1421-1428.
[22] CUI Y, HOU X P, WANG W L, et al. Synthesis and characterization of bio-oil phenol formaldehyde resin used to fabricate phenolic based materials[J]. Materials, 2017, 10(6): 668. DOI: 10.3390/ma10060668.
[23] 杨娜. 邻苯二甲腈改性热固性酚醛树脂及其胶粘剂性能研究[D]. 哈尔滨: 黑龙江省科学院石油化学研究院, 2023.
[24] 张蔚. 基于正交试验法的黄麻纤维增强聚氨酯复合材料综合性能研究[J]. 信息记录材料, 2023, 24(6): 5-9.
[25] SHI J J, ZHANG W F, GU S H, et al. Physical and mechanical properties of bamboo fiber/glass fiber mesh reinforced epoxy resin hybrid composites: effect of fiber stacking sequence[J]. Journal of Natural Fibers, 2023, 20(1): 2167145. DOI: 10.1080/15440478.2023.2167145.

PDF全文 浏览全文

相关图谱

相关信息
扫描二维码